The surface of the wire harness adopts different wrapping methods according to its usage location:

The environment in which the engine wiring harness is located is the most demanding, requiring the use of high temperature resistance, high wear resistance, oil resistance, flame retardancy, waterproofing, and corrosion resistance tape. Junyan's high-performance tape is the ideal choice for protecting engine wiring harnesses.

Recommend using 3301, 4020, 4020X, etc.

2. The body harness has a lot of contact with other components, which can easily cause interference and friction, resulting in noise. Therefore, high noise reduction and high wear resistance tape should be used for the tape in this area. Junyan butyl anti cement can be used at the connection between dry and wet areas

Seal and waterproof. Recommend using 4000, 4400, 9060, etc.

3. The IP wiring harness concentrates most of the operation switches, display devices, and multiple control units in the entire vehicle, which can easily collide with hard materials and produce noise and wear. Therefore, it is necessary to use a wiring harness with good electromagnetic shielding function

Aluminum foil tape, as well as tape with high wear resistance and noise reduction performance, can be wrapped locally with dry tape. Junyan has developed various high-performance adhesive tapes that can meet different needs. Recommend using 3401, 4400, 9050, etc.

4. The working space of the door wiring harness is relatively small, and it is prone to collision with hard materials, resulting in noise and wear. Therefore, high wear-resistant and high noise reducing adhesive tape should be used. Meanwhile, colored PVC tape can be used locally for wrapping, in order to

Distinguish the identification of the wiring harness for the four doors. Recommend using 3100, 4210, 4400, etc.

5. The working space for the ceiling wiring harness is relatively small, and it can be fully wrapped with PVC tape. Thinner ceiling wires can be directly glued to the car with sponge tape. Recommend using 3100, 9010, etc.

6. The working space of the headlight harness is relatively small, and it can be fully wrapped with tape. You can choose a higher temperature resistant velvet or polyester cloth based tape. Recommend using 4010, 4300, etc.